How To Install DD Direct Plus DTH for Receive Digital Channels Free for Lifetime
To install the channels following procedure is to be followed which is only suggestive. Viewers are advised to consult the installation manual supplied with STB or contact the nearest STB Dealer
1. Satellite Name:
a) Go to Installation menu or setup Programme from remote.
b) Select Satellite Edit menu.
c) Select Add New Satellite menu.
d) Select Sat Name Edit menu.
e) Enter Satellite Name as INSAT- 4B.
f) Enter Satellite Longitude as 93.5o E
g) Press Exit
2. LNB Configuration
a) Go to LNB Configuration menu. Ensure that satellite selected is INSAT- 4B only.
b) Set LNB Types as Universal.
c) Set LNB Power on.
d) Press Exit
3. Transponder (TP) Edit:
a) Go to Transponder Edit menu. Ensure that satellite selected is INSAT- 4B.
b) Select Add New TP menu.
c) Enter TP Frequency as 10990 MHz.
d) Select Symbol rate as 27500 ksps.
e) Select Polarization as Vertical.
f) Select Scan as FTA.
g) Press OK.
h) ‘22K’ OFF*
i) ‘Disc. Equal’. Off
After filling the above values Go to ‘search’
Press ‘OK’
The new TV and Radio services will be displayed. Similarly add all other four TPs by entering the frequency, symbol rate and polarization as given in Table above
Note: - The above-mentioned steps may be in, different order in some of the STBs.
In case there is any difficulty, viewers are advised to contact the nearest STB dealer.
To install the channels following procedure is to be followed which is only suggestive. Viewers are advised to consult the installation manual supplied with STB or contact the nearest STB Dealer
1. Satellite Name:
a) Go to Installation menu or setup Programme from remote.
b) Select Satellite Edit menu.
c) Select Add New Satellite menu.
d) Select Sat Name Edit menu.
e) Enter Satellite Name as INSAT- 4B.
f) Enter Satellite Longitude as 93.5o E
g) Press Exit
2. LNB Configuration
a) Go to LNB Configuration menu. Ensure that satellite selected is INSAT- 4B only.
b) Set LNB Types as Universal.
c) Set LNB Power on.
d) Press Exit
3. Transponder (TP) Edit:
a) Go to Transponder Edit menu. Ensure that satellite selected is INSAT- 4B.
b) Select Add New TP menu.
c) Enter TP Frequency as 10990 MHz.
d) Select Symbol rate as 27500 ksps.
e) Select Polarization as Vertical.
f) Select Scan as FTA.
g) Press OK.
h) ‘22K’ OFF*
i) ‘Disc. Equal’. Off
After filling the above values Go to ‘search’
Press ‘OK’
The new TV and Radio services will be displayed. Similarly add all other four TPs by entering the frequency, symbol rate and polarization as given in Table above
Note: - The above-mentioned steps may be in, different order in some of the STBs.
In case there is any difficulty, viewers are advised to contact the nearest STB dealer.
